Chains

From WikiPOBia

(Difference between revisions)
Jump to: navigation, search
(added purpose of chains to second paragraph.)
m (Reordered Smyth reference; reverted spelling of "halliards")
Line 1: Line 1:
-
The '''chains''' of a vessel are the iron linkages which secure the [[shrouds]] to the side of the [[hull]].  For each shroud there is a chain, consisting of several elongated links, the lowest of which is fixed to a ''chain-plate'' bolted to the hull.  From here the chain extends upwards and outwards; it passes through a slot cut in the outer edge of the [[channel]], and immediately above this its uppermost link is formed as a broad ring into which a [[deadeye]] is fitted.
+
The '''chains''' of a vessel are the iron linkages which secure the [[shrouds]] to the side of the [[hull]].  For each shroud there is a chain, consisting of several elongated links, the lowest of which is fixed to a ''chain-plate'' bolted to the hull.  From here the chain extends upwards and outwards; it passes through a slot cut in the outer edge of the [[channel]], and immediately above this its uppermost link is formed as a broad ring into which a [[deadeye]] is fitted. By having the chain-plate (chain-wales or channels) project from the side of the hull, the "outrig" or "spread" of the lower rigging was increased, adding to the security and support the shrouds could provide.<ref>Smyth, W. H. (William Henry), 1788-1865 Admiral. The Sailor's Word~Book. Blackie and Son, Paternoster Row, 1867 Reprinted by Algrove Publishing Limited Almonte, ON Canada 2004.  ISBN 1-897030-05-3</ref> 
-
The term ''chains'' was also applied to the whole structure of chains, channel and deadeyes.  A man standing on one of the channels, perhaps for the purpose of heaving the [[log]] or the [[lead]], would be said to be 'in the (fore, main or mizzen) chains' or simply 'in the chains'. The purpose of having the chain-plate (chain-wales or channels) project for the side of the hull was to increase the "outrig or spread" of the lower rigging which increased the security and support of the assoicated mast and prevents damage to the gunwale caused by rubbing of the shrouds. <ref>Smyth, W. H. (William Henry), 1788-1865 Admiral. The Sailor's Word~Book. Blackie and Son, Paternoster Row, 1867 Reprinted by Algrove Publishing Limited Almonte, ON Canada 2004.  ISBN 1-897030-05-3</ref>  
+
The term ''chains'' was also applied to the whole structure of chains, channel and deadeyes.  A man standing on one of the channels, perhaps for the purpose of heaving the [[log]] or the [[lead]], would be said to be 'in the (fore, main or mizzen) chains' or simply 'in the chains'.   
-
Other uses for chain were just becoming common during the canonical period, allowing Darcy Lever to write of anchor chains in 1819, "These Cables are now in general use."<ref>Lever, Darcy. ''The Young Sea Officer's Sheet Anchor: or,  A Key to the Leading of Rigging and to Practical Seamanship.'' (c)1998 by Dover Publications, Inc.: p.116</ref> Between [[Aubrey]]'s preference for the old-fashioned and the age of most of his commands, it is unsurprising that he does not    use chain cable. ''Chain slings'', however, were shipped before an action to support to the [[yard]]s should the halliard's part, and the standard means of controlling the level of water within the hull was a [[chain pump]].
+
Other uses for chain were just becoming common during the canonical period, allowing Darcy Lever to write of anchor chains in 1819, "These Cables are now in general use."<ref>Lever, Darcy. ''The Young Sea Officer's Sheet Anchor: or,  A Key to the Leading of Rigging and to Practical Seamanship.'' (c)1998 by Dover Publications, Inc.: p.116</ref> Between [[Aubrey]]'s preference for the old-fashioned and the age of most of his commands, it is unsurprising that he does not    use chain cable. ''Chain slings'', however, were shipped before an action to support to the [[yard]]s should one of the halliards part, and the standard means of controlling the level of water within the hull was a [[chain pump]].
==References==
==References==

Revision as of 21:32, 8 January 2009

The chains of a vessel are the iron linkages which secure the shrouds to the side of the hull. For each shroud there is a chain, consisting of several elongated links, the lowest of which is fixed to a chain-plate bolted to the hull. From here the chain extends upwards and outwards; it passes through a slot cut in the outer edge of the channel, and immediately above this its uppermost link is formed as a broad ring into which a deadeye is fitted. By having the chain-plate (chain-wales or channels) project from the side of the hull, the "outrig" or "spread" of the lower rigging was increased, adding to the security and support the shrouds could provide.[1]

The term chains was also applied to the whole structure of chains, channel and deadeyes. A man standing on one of the channels, perhaps for the purpose of heaving the log or the lead, would be said to be 'in the (fore, main or mizzen) chains' or simply 'in the chains'.

Other uses for chain were just becoming common during the canonical period, allowing Darcy Lever to write of anchor chains in 1819, "These Cables are now in general use."[2] Between Aubrey's preference for the old-fashioned and the age of most of his commands, it is unsurprising that he does not use chain cable. Chain slings, however, were shipped before an action to support to the yards should one of the halliards part, and the standard means of controlling the level of water within the hull was a chain pump.

References

  1. Smyth, W. H. (William Henry), 1788-1865 Admiral. The Sailor's Word~Book. Blackie and Son, Paternoster Row, 1867 Reprinted by Algrove Publishing Limited Almonte, ON Canada 2004. ISBN 1-897030-05-3
  2. Lever, Darcy. The Young Sea Officer's Sheet Anchor: or, A Key to the Leading of Rigging and to Practical Seamanship. (c)1998 by Dover Publications, Inc.: p.116
Personal tools